当前位置: 首页 模切产品 模切产品详情

全自动鱼型KF94口罩机

产品参数
产品价格:¥460000.00元/台
产品类别:模切加工/手机辅料/3C手机辅料
产品规格:6150*1950*4680
产品型号:AFMM-6F
所在地区:广东省东莞市长安镇
产品详情
全自动鱼型KF94口罩机 Automatic fish mask machine
AMM-1-1F
设备技术规格书 Technical specification of equipment
一、基本介绍Basic introduction

全自动kf94鱼型口罩机:秦泰盛公司依据客户需求,通过PLC编程控制,通过自动送料,压纹、对折、切边,翻转,焊接耳带等工艺一次成型,成功研发设计出全新的全自动鱼型口罩机,本机具有自动化程度高,操作简单,更人性化的特点。

Fully automatic fish mask machine: According to customer needs, Qin-Tech is controlled by PLC programming, through automatic feeding, embossing, folding, trimming, flipping, welding ear straps and other processes at one time, successfully developed and designed a new automatic fish-shaped mask machine High degree, simple operation and more user-friendly features.


二、设备技术参数 Technical Parameters
型号:AMM-1-1F(一拖一) Model: AMM-1-1F (one drag one)
材料:两层无纺布两层熔喷布
Material: 3-4 ply of non-woven fabric
电压:AC 220V,50HZ
Voltage: AC 220V, 50HZ
重量:1450KG
Weight: 1450KG
外观尺寸:6150*1950*4680
料架:1700(L)x600(W)1780(H) ; 重量:310kg
打片机:2600(L)x650(W)1300(H) ; 重量:670kg
耳带焊接: 1850(L)x700(W)1600(H) ;重量:470kg
Size:
Feeder: 1700(L)x600(W)1780(H); Weight:310kg
Folding and welding machine: 2600(L)x650(W)1300(H); Weight:670kg
Ear belt machine: 1850(L)x700(W)1600(H); Weight:470kg
效率: 70pcs/min(±10%)
Efficiency: 70pcs/min(±10%)
产品规格:可依据客户要求进行定制
Product specifications: can be customized according to customer requirement.
适用行业:一次性医疗防护用品
Applicable industries: disposable medical protective equipment


三、产品特性Product Features
整机由料架部分,上鼻线部分,外形熔接部分,折叠成型,外形切刀部分,焊接耳带部分,成品输出组成,采用伺服电机,超声波焊接技术完成生产。
The whole machine is composed of the material rack part, the upper nose line part, the shape welding part, the folding forming, the shape cutter part, the welding ear belt part, and the finished product output. The servo motor and ultrasonic welding technology are used to complete the production.
1.料架部分:自动送料,刹车配合控制器,保证材料张力。
1. Material rack part: automatic feeding, brake cooperate with controller to ensure material tension.
2.鼻梁条部分:采用调速电机控制自动输送鼻梁条配合齿模超声波焊接
2. Nose bridge section: the cylinder is welded by ultrasonic wave, and the nose bridge is automatically conveyed
3.外形熔接部分:定制齿模配合超声波,完成纹路焊接。
3. Shape welding part: the mold is matched with ultrasonic wave to complete the texture welding.
4.折叠成型:折叠布料
4. Folding: folding fabric
5.外形切刀部分:定制切刀,滚切成型。
5. Shape cutter part: customized cutter, roll-cutting forming.
6.翻转部分:可根据口罩焊接方式实现翻转。
6. Flip part: turn the mask over.
7.耳带焊接:采用全伺服控制效率高每分钟可高达70PCS(±10%)后期维护成本低,配合超声波完成耳带线焊接。
7. Adopt full servo control, high efficiency, up to 70PCS per minute (±10%), low maintenance cost in later stage, and complete the welding of ear strap line with ultrasonic.
8.成品输出:口罩成品输出,收集。
8. Output of finished products: output and collection of finished masks.


四、原材料规格(建议):

Raw material specifications (recommended):
由外至内(材料幅宽260mm)
From outside to inside (material width 260mm)
第一层
The first ply SS级50克无纺布
SS grade 50g non-woven 最外层
Outermost
第二层
The second ply 99级25克熔喷布
99grade 25g melt blown
第三层
The third ply 99级25克熔喷布
99grade 25g melt blown
第四层
The fourth ply SS级25克无纺布
SS grade 25g non-woven 最内层
Innermost

五、细节展示Details
六、设备使用环境Equipment use environment
1.10万级无尘车间使用。
1. Use in the 100,000 class clean room.
2.温度:室温环境,湿度:40%-80%。
2. Temperature: room temperature environment, humidity: 40%-80%.
3.电源:AC220V,50Hz 。
3. Power supply: AC220V, 50Hz.
4.气压:≥0.6MPa 。
4. Air pressure: ≥0.6MPa.

七、设备操作要求Equipment operation requirements
1. 可实现手动、自动及单动运行相互切换的操作模式,故障报警需在人机界面显示等;
1.It can realize the operation mode of manual, automatic and single-action operation switching each other. The alarm should be displayed in the man-machine interface.

2. 采用工控机实现与PLC的实时通讯,通过触摸屏实现人机对话,各项设置操作需简单方便;
2. Adopt industrial computer to realize real-time communication with PLC, realize man-machine dialogue through touch screen, each setting operation needs to be simple and convenient;

3.设备符合国家有关机电设备的安全标准要求;
3. The equipment complies with the national safety standards for electromechanical equipment;



八、其他要求other requirements
1.本设备验收标准:设备组装调试完成前一周供方通知需方准备好生产物料,按技术要求进行验收,验收合格,需方自提发货;
The acceptance standard of the equipment: one week before the completion of the equipment assembly and debugging, the supplier shall notify the buyer to prepare the production materials, carry out the acceptance according to the technical requirements, and the buyer shall deliver the products by itself.
2.设备验收由供需双方指定技术人员进行参与并签署验收报告;
2.The acceptance of the equipment shall be attended by technicians designated by both parties and the acceptance report shall be signed.
九、安装调试和培训 Installation, debugging and training
由供方技术人员负责远程指导需方人员进行安装,调试;调试用料由需方提供;
The supplier's technicians are responsible for the remote guidance of the buyer's personnel for installation and debugging; The commissioning materials shall be provided by the buyer.

十、质量保证和售后服务 Quality assurance and after-sales service
1.设备的保修期限为半年(非正常使用造成损坏及耗材除外;超声波控制器保修1个月);
1.The warranty period of the equipment is half a year (except damages caused by abnormal use and consumables; Ultrasonic controller are guaranteed for 1 months, Welding head and transducer are not warranted);
2.接到设备品质异常,供需双方协商解决;
2. Receiving disorder of equipment, the supplier and the buyer shall negotiate to solve the problem.
3. 保修期满后,供方对设备的维修收取人工和交通等费用,涉及设备相关配件的更换或购买,供方仅收取成本费用。
3. After the expiration of the warranty period, the supplier shall charge labor and transportation fees for the maintenance of the equipment. In case of replacement or purchase of accessories related to the equipment, the supplier shall only charge costs.
其他产品